2019 Cisco 300-080 Dumps | 300-080 VCE – Free

About CTCOLLAB 300-080

Cisco IP Telephony and Video v1.0 (CTCOLLAB) v1.0 Troubleshooting is a 75-minute 55-65 problem assessment that assesses the knowledge and skills that learners need to troubleshoot a Cisco Unified Collaboration solution.

Exam theme

Displays the focus or weight given to each general theme or field in the exam by percentage.Understanding percentages will enable you to allocate learning and exam time more strategically.

Troubleshooting Video Conferencing Architecture12%
Troubleshoot Registration Issues 15%
Troubleshoot Call Setup Issues 25%
Troubleshoot Call Quality Issues 13%
Troubleshoot Call Control Discovery and ILS 15%
Troubleshoot Media Resources 13%
Troubleshoot Application Issues 7%


It is recommended to be familiar with the concepts and objectives covered in the CIPTV2 (300-075) certification path. A working knowledge of the MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways. Should also have the ability to configure and operate Cisco routers and switches.

What are the ways to learn:

  • Classroom training(Troubleshooting Cisco IP Telephony & Video (CTCOLLAB) 300-080 study guide. )
  • E-learning(Troubleshooting Cisco IP Telephony & Video (CTCOLLAB))
  • Practice(Cisco Virtual Internet Routing Lab Personal Edition (VIRL PE),Cisco Modeling labs)
  • Study groups( CCNP Collaboration study group

CTCOLLAB Study Material

Cisco 300-080 Free download Study Material.These resources are designed to complement your learning experience and exam preparation.

  1. Troubleshoot Registration Issues( Troubleshooting Cisco IP Telephony and Video (CTCOLLAB) v1.0 ,
    Troubleshooting Guide for Cisco Unified Communications Manager )
  2. Troubleshoot Call Setup Issues(
    Troubleshooting VoIP in Converged Networks )
  3. Troubleshoot Call Control Discovery and ILS
  4. Troubleshoot Application Issues
  5. Troubleshoot Media Resources
  6. Troubleshoot Call Quality Issues
  7. Troubleshooting Video Conferencing Architecture


Cisco 300-080 Certifications

Pass Cisco CCNP Collaboration 300-080 Exam

Through hard work, there are many ways to prepare yourself. You can watch online videos and read related books to prepare for the 300-080 exam.

Of course you will be prepared, but it will take you more time because you know that time is money.300-080 PDF Dumps. In order to avoid such a thing, my suggestion would be an exam dump, as this will be safe time and you will be more confident to pass your exam 100% success.

Free Cisco Troubleshooting Cisco IP Phone and Video CTCOLLAB 300-080 Dumps latest and updated exam questions for candidates to quickly learn and pass the exam.

Cisco Exam 300-080 Troubleshooting Cisco IP Telephony & Video v1.0

Where can I get new 300-080 dumps with VCE and PDF files?

Can’t you find the latest 300-080 exam dump?

Everyone who is taking the exam for the 300-080 exam will look for the latest 300-080 exam dump, but can’t find them.Why is this happening? There may be this reason. Either they didn’t search the latest 300-080 exam dump correctly or they found that the 300-080 ctcollab pdf preparation could not meet their preparation needs.

Geekcert can provide you with the best and latest Cisco CCNP collaboration 300-080 exam resources. 300-080 dumps.The Cisco certified Training issues provided by Geekcert are studied by experienced IT experts based on past exams. The problem hits 99.9%, so it can help you absolutely pass the exam.

2019 Latest Cisco 300-080 Questions

Q 1
You are troubleshooting video quality issues on a Cisco TelePresence TX9000 Series system. Which CLI command
shows the total number of lost video packets and the received jitter during a call in progress?
A. show call statistics video
B. show call statistics all
C. show call statistics detail
D. show call statistics video detail
Correct Answer: D

Q 2
Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager?
A. missing the configuration command isdn bind-l3 ccm-manager under the ISDN interface
B. mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway
C. misconfigured route group in Cisco Unified Communications Manager
D. incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager
Correct Answer: B

In a Cisco Unified Communications Manager call trace, which string indicates an intrasite call?
A. OutsideDialtone = [1]
B. cmDeviceType=[AccessDevice]
C. OutsideDialtone= [0]
D. OutsideDialtone-[2]
Correct Answer: A

Q 4
Cisco Unified Communications Manager failed to register with the Cisco SAF Forwarder. Assuming that the Cisco IOS
SAF Forwarder is configured correctly, which minimum configuration would be needed on Cisco Unified
Communications Manager to test registration?
A. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD advertising service
B. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD requesting service
C. SAF trunk, SAF security profile, Cisco SAF Forwarder, CCD requesting service, and CCD advertising service
D. SAF trunk, SAF security profile, and Cisco SAF Forwarder
E. SAF trunk, CCD requesting service, and CCD advertising service
Correct Answer: B

Q 5
Which two tasks are performed by the RAS signaling function of H.225.0? (Select two.)
A. Performs bandwidth changes.
B. Transports audio messages between endpoints.
C. Performs disengage procedures between endpoints and a gatekeeper.
D. Allows endpoints to create connections between call agents.
Correct Answer: AC

Q 6
The link from your local Cisco Unity Connection site to another site has gone down. While troubleshooting, you discover
that the local gateway is unable to reach a DNS server. Which action can you take to reestablish the link?
A. Restart the Connection Manager series on the local gateway
B. Create an intersite link manually using the IP address of the remote gateway.
C. Synchronize the two Cisco Unity Connection sites.
D. Create an intersite link manually using the FQDN of the remote gateway.
E. Configure the directory synchronization task schedule on the remote gateway.
Correct Answer: A

Q 7
Uses are making calls from Cisco IP Phones that are registered on a Cisco Unified Communications Manager cluster
through an H 323 gateway to the PSTN phones. Sometimes these users report that calls are dropped after they talked
for some time. Different Cisco Unified CM servers have been rebooted for testing during production hours. Currently
Cisco IOS 12.0 is used on the H.323 gateway. Which change helps to prevent cafe from dropping when a Cisco United
CM server is rebooted during testing?
A. There is no scenario where rebooting an H.323 gateway will allow call survivability.
B. Upgrade the gateway Cisco IOS software to a version later than 12.4(4)9T.
C. A misconfiguration of calling search spaces must exist Reconfigure the CSS.
D. A misconfiguration of VoIP dial peers to the Cisco United CM servers must exist. Reconfigure the VoIP dial peers.
Correct Answer: A

Q 8
When identifying Cisco TelePresence Endpoint traffic characteristics, which three statements are true? 300-080 exam questions.(Choose three.)
A. Latency, jitter, and loss are measured in a round-trip fashion.
B. Latency, jitter, and loss are measured unidirectionally.
C. Latency and loss are measured at a packet level, based on RTP header sequence numbers and time stamps.
D. Latency and jitter are measured at a packet level, based on RTP header sequence numbers and time stamps.
E. Jitter is measured at a video frame level, by measuring the arrival time of the video frame versus the expected arrival
F. Jitter is measured at a packet level, by measuring the arrival time of the packet versus the expected arrival time.
Correct Answer: BCE

Q 9
Which four performance counters are available when monitoring a Cisco MTP device using the Cisco Unified
Communications Manager RTMT? (Choose four.)
A. Resource Total
B. Resource Available
C. Out of Resources
D. Resource Idle
E. Resource Active
F. MTP Streams Active
G. MTP Connection Lost
H. MTP Instances Active
Correct Answer: ABCE

Q 10
An Extension Mobility user successfully logs in to an Extension Mobility (Hoteling) phone, but now the user cannot log in
to an addition^ Extension Mobility (Hoteling)) phone. 300 080 ctcollab book pdf.Why is the user unable to log in to the nest phone?
A. The user is set for autologout for Extension Mobility.
B. The user is set to a maximum of one login.
C. The user does not have login privileges for the new phone
D. The user does not have permission to use Extension Mobility
E. The first phone does not have a logout button, due to an incorrect phone button template.
F. The user is not set to allow multiple logins.
Correct Answer: B

Free Download Real Questions & Answers PDF and VCE file from:

Leave a comment